Understanding Exempt Development

No Council, No Planning, No mucking around

What is Exempt Development?

Many types of home renovations and minor building projects don’t need approval from a Council or accredited certifier. This is called exempt development.

See: planningportal.nsw.gov.au or planning.act.gov.au

Exempt development is very low impact development that can be done for certain residential, commercial and industrial properties. Providing your building project meets specific development standards, approval from your Council is not needed!
A few examples of development that can be exempt development are: decks, garden sheds, carports, fences or repairing a window.

See: planning.nsw.gov.au or planning.act.gov.au

Is my property eligible for Exempt Development?

Although most properties in NSW and ACT are eligible for exempt development, some land is specifically excluded from exempt development provisions. If your proposed development location falls under any of the following categories you should contact your local council’s town planner before proceeding with any proposed works that you wish to carry out as exempt development:

  • Heritage listed property
  • Environmentally sensitive land
  • Land mapped in Schedule 4 as land excluded from the General Exempt Development Code (to view the maps/Schedule 4 click here).
  • Land on your property that falls between a foreshore building line and the corresponding waterline.

Most NSW properties details can be checked using the NSW Planning Portal or by purchasing a ‘Section 149 planning certificate’ from your local council. If in doubt, we recommend contacting your local council or planning authority and asking what size shed or cabana you can put in as exempt development.

What Melwood products are available for Exempt Development?

Although our standard products are designed to be fully portable they are also carefully engineered to assist buyers who wish to take advantage of exempt development provisions in NSW and ACT!
There are also some property specific standards that also need to be complied with for such products if intended for exempt development in NSW & ACT. Some examples of these conditions are:

NSW

  • floor area not exceeding 20m²
  • 900mm setback from boundaries on residential zoned land
  • no more than 3m above existing ground level
  • no more than two such developments per lot
  • be located at least 1m from any registered easement

Please visit NSW Legislation website for full list of conditions.

ACT

  • the roof plan area is not more than 25m² (however if the block size is not more than 500m², a max plan area of 10m² applies)
  • it is behind the building line (if it has a plan area of more than 10m², it also must be at least 15m from the block’s front boundary)
  • no more than 3m above ground level
  • the floor level is not more than 1m above ground
  • the building is enclosed by a roof and has walls on every side, or every side except one

Please visit ACT Department of Planning website for full list of conditions.

Can I use an exempt structure as a granny flat or secondary dwelling?

No. The exempt development code states that the development must not be habitable. This means that it cannot be used as a granny flat or secondary dwelling. Need an approved granny flat or habitable structure? Ask today about how we can assist you with either complying development or council consent.

Where can I find the full list of exempt development standards?

The standards you must comply with for exempt development works are set out in the exempt development legislation for your state or territory. The full policy and list of standards for your state or territory can be viewed here at the following links:

What if my property or particular application doesn’t meet exempt development requirements?

Some property’s or applications require specific approvals and solutions. For information regarding the planning requirements of your proposed development we recommend contacting your local council or an appropriately qualified and experienced professional such as a town planner or accredited certifier.

We offer a wide range of pre-manufactured, lifestyle space solutions from storage sheds to fully compliant granny flats. Building and engineered product drawings are available for purchase should they be required while obtaining development/planning approval. Please contact us today for more information on how our product range can help you further with your home improvement project.